1 Armature (Armadura) + 10 brushes Makita 9564C&CV, 9565C&CV – 120VAC

Description

Armature for Makita 9564, 9565 C and CV models
USABLE on USA 120V models!
this listing is for one armature with insulator and back bearing plus 5 pair brush
es
If you want to purchase the top bearing 6001 RS you can buy it here
https://www.ebay.com/itm/291417383140
If you want to purchase the bearing togheter with Armature, just ADD both to the Cart then click REQUEST TOTAL FROM SELLER on the TOP RIGHT.
I’ll be able to Edit the total and cut the shipping cost from the bearings
TIP nr. 1
if your makita is still making few sparks at speed 5 after replacing the Armature and the 2 brushes, Please consider to replace the brush holder too.
we sell those here in EBAY too. You can find it under the key 1pair brush holder + 2 brushes Makita 9564, 9565, 9566 CV – stone fabrication
after replacing the brush holder too, the sparks will disappear completely!
TIP nr. 2
To remove the back bearing nr. 627 pos nr. 16 in the exploded view on your makita manual, we use a Battery Terminal puller. It work really well in the tight space between the bearing and the insulation washer nr. 14
see one in the picture. So you can re-use insulation washer and the bearing
TIP nr.3
adapt the rubber booth position nr.17 in the manual over the black plastic insulator
watch the video
https://www.youtube.com/watch?v=rNnK-hGAkOY&feature=youtu.be